Servicing The Engine Oil - Toro Z Master Commercial 2000 74141TE Operator's Manual

Riding mower with 48in turbo force side discharge mower
Table of Contents

Advertisement

Servicing the Engine Oil

Oil Type: Detergent oil (API service SF, SG, SH, SJ, or SL)
Crankcase Capacity: with a filter change, 71 ounces (2.1 L);
without a filter change, 61 ounces (1.8 L)
Viscosity: See the table below.
Note: Use of multi-grade oils (5W-20, 10W-30, or 10W-40)
will increase oil consumption. Check the oil level more
frequently when using them.
Checking the Engine Oil Level
Service Interval: Before each use or daily
Note: Check the oil when the engine is cold.
WARNING
Contact with hot surfaces may cause personal
injury.
Keep hands, feet, face, clothing and other body
parts away from the muffler and other hot surfaces.
Important: Do not overfill the crankcase with oil
because damage to the engine may result. Do not run
engine with oil below the low mark because the engine
may be damaged.
1. Disengage the PTO, move the motion control levers to
the neutral locked position and set the parking brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position (Figure 38).
Figure 37
1
3
6
8
31
2
5
4
7
10
9
Figure 38
G008804
G008792

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents