Using Default Settings To Print A Picture - Kodak HERO 5.1 Extended User Manual

Using default settings to print a picture

1. Load photo paper with the logo side facing up (see
page 40), and move the left paper-edge guide until it touches the paper.
2. Insert the memory card into the memory card slot, or connect the digital camera
or portable drive to the front USB port, then press
press OK .
Use only one slot or port at a time.
IMPORTANT:
left paper-edge guide
3. Press or to select the picture you want to print.
4. Press Start to begin printing.
The printer prints one 4 x 6 in. / 10 x 15 cm picture.
To prevent loss of data from your memory card, do not remove it from the
IMPORTANT:
printer while printing.
www.kodak.com/go/aiosupport
KODAK OFFICE HERO 5.1 All-in-One Printer
Loading photo paper,
to select View Photos , then
48