Setting The Signal - Bosch WVH28441AU Instruction Manual And Installation Instructions

M

Setting the signal

i n g S e t t
1. Activate setting mode for the signal volume
Turn to Ú Off.
2. Set the volume for the button signals (depending on model)
Press the 0 button until the required
volume is reached.
3. Selecting the volume for the information signals
Turn one position
clockwise.
t h e
Turn one position Press and hold the ° C button +
clockwise. turn one position clockwise.
Go to step 3. or
Press the 0 button until the
required volume is reached.
s i g n a l
Set to Ú Off, which exits setting mode for the
signal volume.
Set to Ú Off, which exits setting
mode for the signal volume.
Setting the signal
Release the button.
en
27