NETGEAR FS518T FS518T FS518T Installation Manual page 13

Fast ethernet switch with gigabit uplinks

Hide thumbs Also See for FS518T FS518T FS518T:

Table of Contents

FS518T.Manual.FINAL

5/19/00

• Minimum latency of packet transmission (leading edge to leading edge) less than

80 µs

• Easy Plug and Play installation with no software to configure, saving time and

minimizing the potential for configuration errors

• Protocol independence and compatibility with all common protocols, such as

TCP/IP, NetWare, DECnet, and Microsoft Networks

• Normal/Uplink push button to simplify network extension to 10/100 segments

• Connection to a hub, using a simple, straight-through cable

• Auto MDI/MDIX on Gigabit ports, requiring no Normal/Uplink switch on the

two Gigabit ports

• Conformity to standards:

– IEEE 802.3 10BASE-T standard

– IEEE 802.3u 100BASE-TX standard

– IEEE 802.3ab 1000BASE-T standard

– IEEE 802.3x flow control

• Rack Mount Kit provided for installing the switch in a standard 19-inch equip-

ment rack, or for mounting on the wall

12:55 PM

Page 13

introduction

1-5

Table of Contents