Sony MCS-8M Operating Instructions Manual page 51

Menu item Description
SDI OUT Assign the audio signals output from PGM OUT/MIX
AUX1 OUT/AUX OUT 1/AUX OUT 2 connectors to the
Assign embedded audio output from the AUX 1 connector of
SDI OUT.
For details on the possible combinations for output, see page II-50.
SDI OUT Assign the audio signals output from PGM OUT/MIX
AUX2 OUT/AUX OUT 1/AUX OUT 2 connectors to the
Assign embedded audio output from the AUX 2 connector of
SDI OUT.
For details on the possible combinations for output, see page II-50.
SDI OUT Assign the audio signals output from PGM OUT/MIX
MULTI OUT/AUX OUT 1/AUX OUT 2 connectors to the
VIEWER embedded audio output from the MULTI VIEWER
Assign connector of SDI OUT.
For details on the possible combinations for output, see page II-50.
Audio Allows you to delay the audio output from the PGM
Output OUT and MIX OUT connectors on a frame basis. If
Delay 1 the output video is delayed with respect to the audio,
you can delay the audio to synchronize it with the
video.
Note
Adjusting the delay time may result in noise being
generated.
Audio Allows you to delay the audio output from the AUX
Output OUT 1 and 2 connectors on a frame basis. If the
Delay 2 output video is delayed with respect to the audio, you
can delay the audio to synchronize it with the video.
Note
Adjusting the delay time may result in noise being
generated.
Output Adjust the level of audio output to each output
Level destination.
Tip
The output level of the audio output from the SDI
OUT PGM connector can be adjusted with the
program fader in the audio control block.
Oscillator You can make the settings for outputting the
oscillator signal used for adjustment.
Tip
If other than "Off" is selected for [Freq] when the
output destination of the oscillator signal is set in
[Term], the DIM button lights and the output level for
the headphones or monitor is automatically reduced.
Knob Parameter Meaning
V3 Left Audio signal to
assign
V4 Right Audio signal to
assign
V3 Left Audio signal to
assign
V4 Right Audio signal to
assign
V3 Left Audio signal to
assign
V4 Right Audio signal to
assign
V3 PGM Delay time for
audio output
from PGM OUT
connector
V4 MIX Delay time for
audio output
from MIX OUT
connector
V3 AUX1 Delay time for
audio output
from AUX OUT 1
connector
V4 AUX2 Delay time for
audio output
from AUX OUT 2
connector
V2 MIX Output level from
MIX OUT
connector
V3 AUX1 Output level from
AUX OUT 1
connector
V4 AUX2 Output level from
AUX OUT 2
connector
V2 Freq Frequency of
oscillator signal
V3 Level Output level of
oscillator signal
V4 Term Terminal of
oscillator signal
Setting range
None, AUX1,
AUX2, PGM-L,
MIX-L
None, AUX1,
AUX2, PGM-R,
MIX-R
None, AUX1,
AUX2, PGM-L,
MIX-L
None, AUX1,
AUX2, PGM-R,
MIX-R
None, AUX1,
AUX2, PGM-L,
MIX-L
None, AUX1,
AUX2, PGM-R,
MIX-R
0.00 to 7.50 (1.00)
0.00 to 7.50 (1.00)
0.00 to 7.50 (1.00)
0.00 to 7.50 (1.00)
–∞ to +10 dB
(0 dB)
–∞ to +10 dB
(0 dB)
–∞ to +10 dB
(0 dB)
Off, 100 Hz,
440 Hz, 1 kHz,
10 kHz
–∞ to 0 dB
(–20 dB)
None, PGM, MIX,
AUX1, AUX2, All
(all output
destinations)
II-51
Audio Setup (Audio)