Netis WF2412 Quick Installation Manual page 3

computer must be connected to the device via Ethernet or wireless network. The Router is
configured with the default IP address of 192.168.1.1 and subnet mask of 255.255.255.0 and its
DHCP server is enabled by default.
Here we use Windows XP for example. If your network settings are not already set and you
need to complete this step, the configurations are similar for the other operating systems.

Open My Computer on your desktop or through the Start menu, right click on My Network
Places in the Other Places menu to the left and select Properties. Right click on your Local
Area Connection in the window that appears and select Properties. In the properties window
that appears, under "This connection uses the following items:" select Internet Protocol
(TCP/IP) and then click the Properties button below.

Select obtain an IP address automatically and obtain DNS server address automatically, click
OK
Figure 5-1