Using Ez Television (1Seg)/Digital Radio - Hitachi w52h User Manual

Using EZ Television
(1Seg)/Digital Radio
While the standby screen
is displayed, press b .
You also need to perform an initialization
procedure before you can use au Media
Tuner. If you have not performed
initialization yet, refer to "Configuring au
Media Tuner Initial Settings" (page 76).
Use s, and L and R
to change the channel.
You can use j to adjust the volume level.
Press b to cycle through modes in the following
sequence: EZ Television (1Seg), Digital Radio, EZ
Channel-Plus.
With EZ Channel-Plus, you can select a program with s
and then press c (
◎ If this is the first time you are starting Digital Radio, refer to step 3 under
"Configuring au Media Tuner Initial Settings" (page 76) and configure
Digital Radio channel settings. If you are outside a Digital Radio reception
area, select "
（
設定なし
◎ In any mode, pressing R while the final channel is displayed or
L while the first channel is displayed will switch mode.
◎ Press F or hold down ( for about one second, and then
pressing 2 (Stop) will exit the au Media Tuner.
78
再生 ) (Play) to start playback.
" (Set Manually) and then select "
マニュアル設定
） " (Other Area (No Settings)).
その他の地域