NETGEAR WNHDE111 5GHz User Manual page 76

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
To restore the factory default configuration settings:
1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings
button, located on the rear panel of the bridge, for about 20 seconds.
2. Release the restore factory settings button, and wait for the bridge to reboot.
The factory default settings are restored so that you can access the bridge from your Web
browser using the factory defaults.
A-4
v1.1, May 2008
Technical Specifications