NETGEAR WNHDE111 5GHz User Manual page 56

Netgear wireless-n hd access point/bridge user manual
Hide thumbs Also See for WNHDE111 5GHz:
Table of Contents

Advertisement

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
This table below describes the WISH options.
Table 6-1. WISH Options
Item
Enable WISH
Priority Classifiers
HTTP
Windows
Media Center
Automatic
Add Wish Rule
Enable
Name
Priority
Protocol
Host 1 & 2 IP
Ranges
Host 1 & 2 Port
Ranges
Wish Rules List
6-4
Description
Enables WISH prioritization.
Applies WISH prioritization to different categories of traffic.
Allows the access point to recognize HTTP transfers for many common audio
and video streams and prioritize them above other traffic. Such streams are
frequently used by digital media players.
Enables the access point to recognize certain audio and video streams gen-
erated by a Windows Media Center PC and to prioritize these above other
traffic. Such streams are used by systems known as Windows Media Extend-
ers, such as the Xbox 360.
When enabled, this option causes the access point to automatically attempt
to prioritize traffic streams that it doesn't otherwise recognize, based on the
behavior that the streams exhibit. This acts to deprioritize streams that exhibit
bulk transfer characteristics, such as file transfers, while leaving interactive
traffic, such as gaming or VoIP, running at a normal priority.
A WISH Rule identifies a specific message flow and assigns a priority to that
flow. For most applications, the priority classifiers ensure the right priorities
and specific WISH Rules are not required.
WISH supports overlaps between rules. If more than one rule matches for a
specific message flow, the rule with the highest priority will be used.
Specifies whether the entry will be active or inactive.
Create a name for the rule that is meaningful to you.
Choose one for each rule: Background; Best Effort; Video; and Voice
Pick from the list (Any; TCPIP; UDP; Both; ICMP; Other) or specify another
The rule applies to a flow of messages between computers that have IP
address within the ranges set here.
The rule applies to a flow of messages using the port ranges specified here
between the corresponding host computers identified by their IP address the
ranges.
This section lists the defined WISH Rules. Click the Enable checkbox at the
left to directly activate or de-activate the entry. An entry can be changed by
clicking the Edit icon or can be deleted by clicking the Delete icon. When you
click the Edit icon, the item is highlighted, and the "Edit WISH Rule" section is
activated for editing.
v1.1, May 2008
Fine-Tuning Your Network

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wnhde111-100narWnhde111-100nas

Table of Contents