WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
3. Check the most recent firmware version offered against the firmware version shown on your
Router Status screen.
4. If the version on the NETGEAR website is more recent, download the file to your computer.
5. Under Maintenance on the main menu, select Firmware Upgrade.
6. Click Browse, and locate the firmware image that you downloaded to your PC (the file ends in
.bin).
7. Click Upload to send the firmware to the unit.
Warning: When uploading software to the Wireless-N AccessPoint/Bridge, do not
When the upload is complete, your bridge automatically restarts. The upgrade process
typically takes about 1 minute. Read the new software release notes to determine whether you
must reconfigure the bridge after upgrading.
7-10
interrupt the Web browser by closing the window, clicking a link, or loading a
new page. If the browser is interrupted, it could corrupt the software.
v1.1, May 2008
Using Network Management Tools