Configuring The Access Point Parameters - NETGEAR WNHDE111 5GHz User Manual

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
.
Figure 5-1

Configuring the Access Point Parameters

The Access Point Settings are:
• Access Point IP Address. The LAN IP address of the WNHDE111.
• IP Subnet Mask. The LAN subnet mask of the router. Combined with the IP address, the IP
subnet mask allows a device to know which other addresses are local to it, and which must be
reached through a gateway or router.
Note: If you change the LAN IP address of the unit while connected through the browser,
you will be disconnected. You must then open a new connection to the new IP
address and log in again, and your computer must be in the same range of
addresses as the unit is.
• Default Gateway. The LAN IP address of the router.
• Primary and Secondary DNS Servers: The DNS addresses the WNHDE111 will use.
5-2 Customizing Your Wireless Network
v1.1, May 2008