NETGEAR WNHDE111 5GHz User Manual page 74

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
Table A-1. Wireless-N AccessPoint/Bridge Default Configuration Settings
Feature
Wireless Communication
SSID Name
Security
Broadcast SSID
Transmission Speed
Country/Region
RF Channel
Operating Mode
Data Rate
Output Power
a. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will
vary. Network conditions and environmental factors, including volume of network traffic, building
materials and construction, and network overhead, lower actual data throughput rate.
Network Protocol and Standards Compatibility
Data and Routing Protocols
Power Adapter
North America
United Kingdom, Australia
Europe
Japan
All regions (output)
Physical Specifications
Dimensions
Weight
Environmental Specifications
Operating temperature
Operating humidity
A-2
Default Setting
Enabled
NETGEAR-HD
WPA2 Enabled (key is serial number printed on back
label)
Enabled
a
Auto
United States in the U.S., otherwise varies by region
Auto
802.11 n/a mixed mode
Best
Full
TCP/IP
120V, 60 Hz, input
240V, 50 Hz, input
230V, 50 Hz, input
100V, 50/60 Hz, input
12 V DC @ 1.5A output, 22W maximum
28 x 175 x 119 mm (1.1 x 6.89 x 4.68 in.)
0.3 kg (0.66 lb)
0° to 40° C (32º to 104º F)
90% maximum relative humidity, noncondensing
v1.1, May 2008
???
???
???
???
???
Technical Specifications
???