NETGEAR WNHDE111 5GHz User Manual page 61

Table 7-1. Device Info Status Fields (continued)
Field
Wireless LAN
Wireless Radio
WISH
MAC Address
Network Name (SSID)
Channel
Security Mode
Wi-Fi Protected Setup
LAN Computers
• Click Wireless to display wireless client address, mode, rate and signal strength status.
Figure 7-2
Table 7-3 describes the traffic statistics.
Using Network Management Tools
WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
Description
Indicates whether the radio feature of the router is enabled. If not
enabled, the Wireless LED on the front panel is off.
Identifies if WISH is active or not.
This is the unique physical address being used by the Ethernet ports
of the wireless interface.
The wireless network name (SSID) being used by the wireless port of
the router. The default is NETGEAR-HD.
Identifies the channel of the wireless port being used. Click the link to
the online document
the frequencies used on each channel. In Up to 300 Mbps mode,
there are two channels: a primary channel (P) and a secondary
channel (S).
Indicates the wireless security mode:
• None
• WEP
• WPA/WPA2 (the default)
Indicates whether the radio feature of the router is enabled. If not
enabled, the Wireless LED on the front panel is off.
The names and address of devices in the network.
v1.1, May 2008
"Wireless Networking Basics" in Appendix B for
7-3