Connecting The Wgu624; Connecting The Wireless Router - NETGEAR WGU624 Reference Manual

Reference Manual for the Double 108 Mbps Wireless Firewall Router WGU624

Connecting the WGU624

This section provides instructions for connecting the Double 108 Mbps Wireless Firewall Router
WGU624. Also, the Double 108 Mbps Wireless Router WGU624 Resource CD included with
your router contains an animated Installation Assistant to help you through this procedure.

Connecting the Wireless Router

Follow the steps below to connect your router to your network. You can also refer to the Double
108 Mbps Wireless Router WGU624 Resource CD included with your router which contains an
animated Installation Assistant to help you through this procedure.
C
1.
ONNECT THE WIRELESS ROUTER
Turn off your computer and your cable or DSL modem.
a.
Locate the Ethernet cable (Cable 1 in the diagram below) that connects your PC to the
b.
modem.
Disconnect the cable at the computer end only, point A in the diagram.
c.
Figure 3-1: Disconnect the Ethernet cable from the computer
Look at the label on the bottom of the wireless router. Locate the Internet port. Securely
d.
insert the Ethernet cable from your modem (Cable 1 in the diagram below) into the
Internet port of the wireless router as shown in point B in the diagram below.
3-4
,
THE COMPUTER
A
,
AND THE MODEM
Connecting the Router to the Internet
M-10153-01
.