NETGEAR WGU624 Reference Manual page 36

Double 108 mbps wireless firewall router
Hide thumbs Also See for WGU624:
Table of Contents

Advertisement

Reference Manual for the Double 108 Mbps Wireless Firewall Router WGU624
To configure your Internet service connection for PPTP, fill in the following fields:
Enter your Login and Password. These fields are case sensitive.
To change the login timeout, enter a new value in minutes. This determines how long the
router keeps the Internet connection active after there is no Internet activity from the LAN.
Entering a timeout value of zero means never log out.
Enter your IP address if your ISP provided a fixed IP address, such as 10.0.1.20. Otherwise,
leave the IP address set to 0.0.0.0 and you will be automatically assigned an IP address when
you connect.
Enter a Server IP Address if your ISP provided one, such as 10.0.0.138. Otherwise, leave the
IP address set to 0.0.0.0 and the Server IP Address will be automatically supplied when you
connect.
Normally the Connection ID/Name should be left blank. If your ISP provided one, then enter it
here.
If you know that your ISP does not automatically transmit DNS addresses to the router during
login, select "Use these DNS servers" and enter the IP address of your ISP's Primary DNS
Server. If a Secondary DNS Server address is available, enter it also.
Note: If you enter DNS addresses, restart your computers so that these settings take effect.
The Router MAC Address section determines the Ethernet Mac address that will be used by
the router on the Internet port. Some ISPs will register the Ethernet MAC address of the
network interface card in your PC when your account is first opened. They will then only
accept traffic from the MAC address of that PC. This feature allows your router to masquerade
as that PC.
To change the MAC address, select "Use this Computer's MAC address." The router will then
capture and use the MAC address of the PC that you are now using. You must be using the one
PC that is allowed by the ISP. Or, select "Use this MAC address" and enter it.
Click Apply to save your settings.
Click Test to test your Internet connection. If the NETGEAR Web site does not appear within
one minute, refer to
3-14
Chapter 8,
"Troubleshooting".
M-10153-01
Connecting the Router to the Internet

Advertisement

Table of Contents
loading

Table of Contents