NETGEAR WGU624 Reference Manual page 87

Reference Manual for the Double 108 Mbps Wireless Firewall Router WGU624
Figure 7-4: LAN IP Setup Menu
The LAN IP parameters are:
IP Address: This is the LAN IP address of the router.
IP Subnet Mask: This is the LAN Subnet Mask of the router. Combined with the IP address, the
IP Subnet Mask allows a device to know which other addresses are local to it, and which must be
reached through a gateway or router.
RIP Direction: RIP (Router Information Protocol) allows a router to exchange routing
information with other routers. The RIP Direction selection controls how the router sends and
receives RIP packets. Both is the default.
• When set to Both or Out Only, the router will broadcast its routing table periodically.
• When set to Both or In Only, it will incorporate the RIP information that it receives.
• When set to None, it will not send any RIP packets and will ignore any RIP packets
received.
Advanced Configuration
M-10153-01
7-9