D-Link dsl-380t Quick Instruction Manual page 6

Configuring the Modem (continued)
The initial step is to Select the Internet Connection Type for the WAN interface. Your ISP has
given this information to you. If you do not know what type of connection to use, exit the Setup
Wizard and contact your ISP for the information. The Setup Wizard window that appears when
you click the Next button depends on what connection type you select. The connection types
available in the Setup Wizard window are PPPoE/PPPoA, Static IP Address, and Bridge Mode.
Follow the instructions below for the type of connection you are using.
Select the Connection Type
used for your ADSL service.
Click the Next button.
6