Table of Contents
Advertisement
Item
Function
Backlight
Adjusting the backlight brightness.
Senseye
To set ACE, Noise Reduction, and Skin Tone.
Advance contrast enhance. (Standard, Low, Off,
ACE
High)
Noise
Select to reduce the noise level of connected
Reduction
equipment.
Skin Tone
Skin Color adjust. (0-10)
Press the OK button to automatically adjust the
Auto
display settings to optimize performance based on
Adjust
the VGA mode.
Adjusts the position of the picture left and right in
H-Pos
the window based on the VGA mode.
Adjusts the position of the picture up and down in
V-Pos
the window based on the VGA mode.
Controls the width of the picture based on the VGA
Size
mode.
Controls the signal phase, which can improve
Phase
focus clarity and image stability based on the VGA
mode.
*Auto Adjust, H-Pos, V-Pos, Size, and Phase selections will only appear in VGA input source.
Setting up User Picture mode
You can adjust the settings in the Picture menu and save them as your
Personal Picture Mode. You can press
directly.
1. Press
MENU to display the OSD menu on-screen.
2. Press
or
menu.
3. Press ▼ to select Picture Mode, and then press
4. Press ▲ or ▼ o select Contrast, Brightness, Colour, Tint, Sharpness and then press
( ◄ or ► ) to adjust the settings to your satisfaction.
or
36
OSD (On-Screen Display) menu
( ◄ or ► ) to select PICTURE, and then press OK to enter the PICTURE
Operation
Press
or ► )to make
adjustment.
Press
( ◄ or ► ) to
change selection
or make
adjustment.
Press OK
Press
or ► ) to change
selection.
on the remote control to select these modes
( ◄ or ► ) to select User.
or
Range
( ◄
or
0 to 5
• Standard
• Low
• Off
or
• High
• Low
• Off
• Auto
• High
• Standard
0 to 10
0 to 100
0 to 100
( ◄
or
-30 to +30
0 to 100
Advertisement
Table of Contents
