rine growth as possible. If necessary, the
boat bottom can be coated with an anti-foul-
ing paint approved for your area to inhibit
marine growth.
Do not use anti-fouling paint which includes
copper or graphite. These paints can cause
more rapid engine corrosion.
EMU36341
Motor disposal requirements
Never illegally discard (dump) the motor.
Yamaha recommends consulting the dealer
about discarding the motor.
EMU36351
Emergency equipment
Keep the following items onboard in case
there is trouble with the motor.
A tool kit with assorted screwdrivers, pli-
●
ers, wrenches (including metric sizes), and
electrical tape.
Waterproof flashlight with extra batteries.
●
An extra engine shut-off cord (lanyard)
●
with clip.
Spare parts, such as an extra set of spark
●
plugs.
Consult your Yamaha dealer for details.
EMU25221
Emission control information
EMU25310
U.S. insular areas
Engines affixed with the label pictured below
conform to U.S. Environmental Protection
Specifications and requirements
Agency (EPA) regulations for marine SI en-
gines. See the label affixed to your engine for
details.
EMU25322
Approval label of emission control certif-
icate
This label is attached to the bottom cowling.
Existing Technology; N/A
1. Approval label location
EMISSION CONTROL INFORMATION
ENGINE FAMILY :
THIS ENGINE CONFORMS TO 2001 U.S. EPA REGULATIONS FOR MARINE SI ENGINES.
REFER TO THE OWNERS MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
FELs :
SPARK PLUG :
DISPLACEMENT :
ADVERTISED POWER :
EMU25332
Manufactured date label
This label is attached to the clamp bracket or
the swivel bracket.
1
g/kW-hr
IDLE SPEED :
SPARK PLUG GAP (mm) :
3
cm
FUEL : GASOLINE
kW
VALVE LASH (mm) :
ZMU06311
rpm IN NEUTRAL
IN : N/A
EX : N/A
ZMU05230
12