Viewing General, Log, Station, And Statistical Information - NETGEAR WG102 Reference Manual

Reference Manual for the NETGEAR WG102 ProSafe 802.11g Wireless Access Point
Enable the SysLog option if you have a SysLog server on your LAN. If enabled, you must enter
the IP address of your SysLog server and the port number your SysLog server is configured to use.
• SysLog Server IP address: The access point will send all the SysLog to the specified IP
address if SysLog option is enabled. Default: 0.0.0.0
• Port: The port number configured in the SysLog server on your LAN. Default: 514
The Activity Log Window displays the Access Point system activity.
You may click Refresh to update the display or Click Save As. To save the log contents into a file
on your PC, click Save As and save the file to a disk drive.

Viewing General, Log, Station, and Statistical Information

The General information screen provides a summary of the current WG102 configuration settings.
From the main Menu of the browser interface, click General to view the System Status screen,
shown below.
Figure 4-2: Wireless Access Point Status screen
This screen shows the following parameters:
4-2
October 2004
Management