NETGEAR WAG302 Reference Manual page 5

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302
• Reorient or locate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Warning for North America, and Australia
Warning! To meet FCC and other national safety guidelines for RF exposure, the antennas for this device (see below)
must be installed to ensure a minimum separation distance of 20cm (7.9 in.) from persons. Further, the antennas shall not
be colocated with other antenna or radio transmitter.
Antenna Statement for North America and Australia
In addition to its own 2 antennas, the WAG302 device has been approved for use with the following detachable antennas
and antenna cables:
Approved Antenna Gain and
Antennas type
NETGEAR 18 dBi, directional
ANT24D18 outdoor/indoor
NETGEAR 9 dBi, omnidirectional
ANT2409 outdoor/indoor
NETGEAR 5 dBi, ceiling/wall
ANT24O5 indoor
* WAG302 maximum radiated power in North America and Australia: 20 dBm – cable loss + antenna gain
www.netgear.com/go/wag302_fcc
Please go to
with the WAG302 in North America and Australia.
Industry Canada Compliance Statement
This Class B Digital apparatus meets all the requirements of the Canadian Interference Causing Equipment Regulations
ICES 003.
Cet appareil numerique de classe B respecte les exigences du reglement du Canada sur le materiel brouilleur NMB-003.
The device is certified to the requirements of RSS-210 for 2.4 GHz spread spectrum devices. The use of this device in a
system operating either partially or completely outdoors may require the user to obtain a license for the system according
to the Canadian regulations. For further information, contact your local Industry Canada office.
Approved Antenna
Cable
NETGEAR
ACC-10314-01 thru 05
NETGEAR
ACC-10314-01 thru 05
NETGEAR
ACC-10314-01 thru 05
for an updated list of wireless accessories approved to be used
202-10078-01
Antenna Cable Maximum
Length Transmitted Power
1.5 m to 30 m 19 dBm + 18 dBi ant.
1.5 m to 30 m 19 dBm + 9 dBi ant.
1.5 m to 30 m 19 dBm + 5 dBi ant.
-v