NETGEAR WAG302 Reference Manual page 22

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302
• Restore to Factory Defaults Button
The restore to default button located between the Ethernet RJ-45 connector and the power
socket restores the WAG302 to the factory default settings.
• Serial Console Port
Male DB-9 serial port for serial DTE connections.
• RJ-45 Ethernet Port
Use the WAG302 Ethernet RJ-45 port to connect to an Ethernet LAN through a device such as
a hub, switch, router, or POE switch.
• Power Socket
This socket connects to the WAG302 12V 1.2A power adapter.
2-8
202-10078-01
Introduction