NETGEAR WAG302 Reference Manual page 30

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302
• Click the Basic Settings link to view the Basic Settings menu.
Figure 3-4: Basic Settings menu
• Configure the settings appropriate for your network. The default values are suitable
for most users and situations.
– Access Point Name: This unique name is the access point NetBIOS name. The
default Access Point Name is located on the bottom label of WAG302. You may
modify the default name with a unique name up to 15 characters long. The default
is netgearxxxxxx, where xxxxxxx represents the last 6 digits of the WAG302
MAC address.
3-8 Basic Installation and Configuration
202-10078-01