Table of Contents
Advertisement
E-PQQX14855ZA.book 18 ページ ２００５年７月２９日 金曜日 午後７時１３分
Programmable Settings
Feature
Set flash time
Change language
Programming using the function keys
You can program features using the functions keys ({F1}, {F2} and {F3} keys).
For your reference, a chart of all programmable functions is printed below. Details for each
item can be found on the corresponding pages.
Important:
L Before programming, make sure the unit is not being used.
1
To begin programming, press {MENU} ({F2} key).
2
Press {<} or {>} to scroll through the main menu.
3
Press {SELECT} ({F3} key) to select the desired main menu item.
4
Press {<} or {>} to scroll through the sub-menu.
5
Press {SELECT} ({F3} key) to select the desired sub-menu item.
6
Press {<} or {>} repeatedly to select the desired setting.
7
Press {SAVE} ({F3} key) to save the new setting.
8
Press {STOP} to exit programming mode.
Note:
L The default settings are indicated by *.
Main menu
Sub-menu
Caller list
Ringer
Ringer volume
setting
Ringer tone
Initial
LCD contrast
setting
Key tone
Set dial mode
Set flash time
Change language
18
Feature code
Setting code
{1}: 900 ms {2}: 700 ms*
{1} {2} {1}
{3}: 600 ms {4}: 400 ms
{5}: 300 ms {6}: 250 ms
{7}: 200 ms {8}: 160 ms
{9}: 110 ms {0}: 100 ms
{*}: 90 ms {#}: 80 ms
{1}: English* {2}: French
{1} {1} {0}
Option
Low, Medium, High*, Off
pattern 1*–3
Level 1–6 (Default: 3)
On*, Off
Pulse, Tone*
900 ms, 700 ms*, 600 ms,
400 ms, 300 ms, 250 ms
200 ms, 160 ms, 110 ms,
100 ms, 90 ms, 80 ms
English*, French
Page
page 20
page 19
Reference page
for programming
page 14
page 19
page 19
page 19
page 20
page 8
page 20
page 19
Advertisement
Table of Contents
