Panasonic KX-TS730C Operating Instructions Manual page 22

07Recording Message.fm 22 ページ ２００５年８月２５日 木曜日 午前９時１４分
Recording a Conversation
Press {PLAY} ({F1} key).
#1
L The unit will play back the new recorded
conversations.
L When you have no new recorded
conversations, the unit will play back all
recorded conversations.
L If the unit has no recorded
conversations, the display will show
"No recordings", and the unit will go
back to standby mode.
Note:
L The current conversation number (for
example, "#1") is displayed during
playback.
During playback
Key Command
Change fast-forward speed
{FF}
({F3} key) (four times or sixty times
normal speed), each time
you press {FF}
L If {PLAY} ({F2} key) is
pressed during fast-
forwarding, playback will
be resumed at normal
speed.
L The selected speed will
flash on the display ("x4"
or "x60").
Change rewind speed (four
{REW}
({F1} key) times or sixty times normal
speed), each time you
press {REW}
L If {PLAY} ({F2} key) is
pressed during rewinding,
playback will be resumed
at normal speed.
L The selected speed will
flash on the display ("x4"
or "x60").
22
Key
{*} (<)
Play
00:00:01
22
< >
{#} (>)
{0} (22)
{STOP}
To adjust the speaker volume
8 levels (high to low) are available. Press
{>} or {<} repeatedly during playback.
"Receiver volume" is displayed.
Erasing a specific conversation
1
2
Erasing all conversation
1
2
3
Command
Repeat conversation
L If {*} (<) is pressed
within the first 2 seconds,
the previous conversation
will be played.
L If {*} (<) is pressed
during playback of the
first conversation, the first
conversation will be
repeated.
Skip conversation
Pause playback
L To resume playback,
press {PLAY} ({F2} key).
L To stop playback
completely, press
{STOP}.
Stop playback
Press {ERASE} ({F2} key) while
listening to the conversation you want
to erase.
Press {SELECT} ({F3} key) at
"Individual erase".
L The display shows "Erased", then
the next one will be played.
Press {ERASE} ({F2} key) while
listening to the conversation.
Press {<} or {>} to select
"All erase".
Press {SELECT} ({F3} key).
L The display shows "All erased".