Table of Contents
Advertisement
E-PQQX14855ZA.book 23 ページ ２００５年７月２９日 金曜日 午後７時１３分
Display messages
One of the following messages will be displayed in the condition described below.
Display message
Phonebook full
No items stored
Memory full
Troubleshooting
General use
Problem
The unit does not work.
I cannot hear a dial tone.
Programmable settings
Problem
I cannot program items.
While programming, the
unit starts to ring.
Cause & solution
L There is no space to store new items in the phonebook.
Erase unnecessary items (page 13).
L Your phonebook, redial list or caller list is empty.
L Conversation recording memory is full. Erase
unnecessary items (page 22).
Cause & solution
L Check the connections (page 6).
L Unplug the unit's AC adaptor or Interface cable to reset
the unit. Reconnect the adaptor or interface cable and
try again.
L Confirm that the telephone line cord is connected
(page 6).
L Disconnect the unit from the telephone line and connect
a known working telephone. If the working telephone
operates properly, contact our service personnel to
have the unit repaired. If the working telephone does
not operate properly, contact your telephone company.
Cause & solution
L Do not pause for over 1 minute while programming.
L A call is being received. Answer the call and try again
from the beginning after a call is finished.
Useful Information
23
Advertisement
Table of Contents
