Playing An Audio Cd - Technika TK9PD14 Owner's Handbook Manual

PLAYING AN AUDIO CD

• Load an Audio CD into the player.
The player will read the disc. Most CDs will start playing
automatically.
Play Pause:
• Press the /, button at any time to pause playback.
• Press the /, button again to continue to play the
disc.
To change track:
• Press the } or { button to skip to the next or
previous track.
Direct access track selection:
• You can jump to a track number by entering the track
number using the numeric keypad.
NOTE: If you want to jump to a track number higher than
9, press the 10+ button to add 10 to the track count, then
press one of the number buttons to add the second digit.
Fast search:
• Press the ] or [ button on the remote control
repeatedly to fast search forward or backward
through the movie.
Each time you press the button, the speed will change 2X
g 4X g 8X g16X g32X g Normal
• Press /, to resume play.
To set the volume:
• Press the VOL+ or VOL- button to turn the volume
up or down.
The volume level will be displayed briefly.
When the volume level reaches '14' a warning will be
displayed about hearing damage.
• To raise the volume above this level, press 'ENTER' .
You can now increase the volume level beyond '14' .
Muting the sound:
• Press the MUTE button to mute and un-mute the
sound.
To stop the disc:
• Press the . button.
Play will stop, holding at the point you stopped the disc.
• To resume playing the disc from the point where you
stopped, press the /, button.
To completely stop the disc:
• Press the . button twice.
The disc will stop.
16
Repeat play:
• Press the REPEAT button repeatedly to step through
the repeat mode options.
Repeat track
Repeat all
Repeat off
Audio CD time display:
Press the DISPLAY button repeatedly to change the mode
of the time display between -
Elapsed time of the track playing
Remaining time of the track playing
Elapsed time of the disc
Remaining time to the disc end