Yamaha DRX-1 Service Manual page 26

DRX-1
Error Nr Error String
30304 "Interrupt B wasn't raised."
30305 "Interrupts A and B were raised."
30400 ""
30401 "VSM SDRAM Bank1 Memory databus test
goes wrong."
30402 "VSM SDRAM Bank1 Memory addressbus
test goes wrong."
30403 "VSM SDRAM Bank1 Physical memory
device test goes wrong."
30404 " VSM SDRAM Bank2 Memory databus test
goes wrong."
30405 " VSM SDRAM Bank2 Memory addressbus
test goes wrong."
30406 " VSM SDRAM Bank2 Physical memory
device test goes wrong."
30500 ""
30501 "Communication with the analogue board
fails."
30502 "Echo test to analogue board returned wrong
string."
40000 ""
40001 "NVRAM Reset; I2C failed"
40100 "NVRAM address = 0xaddress -> Byte value =
0xvalue"
40101 "NVRAM Read; I2C failed"
40102 "NVRAM Read; Invalid input"
40200 ""
40201 "NVRAM Modify; I2C failed"
40202 "NVRAM Modify; Invalid input"
40300 "DV Unique ID = id"
40301 "NVRAM Read DV Unique ID; I2C failed"
40400 "\r\n Error log:\r\n errorString \r\n "
40401 "NVRAM error log; I2C failed"
40402 "NVRAM error log is invalid"
40403 "Front panel failed"
40700 ""
40701 "NVRAM error log reset; I2C failed"
40900 "Region code Change counter is reset"
40901 "NVRAM region code reset; I2C failed"
41000 ""
41001 "NVRAM Store DV Unique ID; I2C failed"
41002 "NVRAM Store DV Unique ID; Invalid input"
50000 ""
50007 "Execution of the command on the analogue
board failed."
50008 "The frontpanel could not be accessed by the
ana-logue board."
50009 "The echo from the frontpanel processor was
not correct."
50100 " Front panel version: FPversion "
50102 "Execution of the command on the analogue
board failed."
26
Error Nr Error String
50103 "The frontpanel could not be accessed by the
ana-logue board."
50200 ""
50204 "Execution of the command on the analogue
board failed."
50205 "The frontpanel could not be accessed by the
ana-logue board."
50206 "The frontpanel did not show a starburst."
50207 "The user skipped the FP-which pattern test."
50208 "The user returned an unknown confirmation:
con-firmation"
50209 "The frontpanel did not show horizontal
segments."
50210 "The frontpanel did not show vertical
segments."
50300 ""
50304 "Execution of the command on the analogue
board failed."
50305 "The frontpanel could not be accessed by the
ana-logue board."
50306 "The frontpanel did not light all labels."
50307 "The user skipped the rest of the FP-label
test."
50308 "The user returned an unknown confirmation:
con-firmation"
50400 ""
50404 "Execution of the command on the analogue
board failed."
50405 "The frontpanel could not be accessed by the
ana-logue board."
50406 "The LED's could not be turned on."
50407 "The user skipped the rest of the FP-LED
test."
50408 "The user returned an unknown confirmation:
con-firmation"
50500 ""
50502 "Front panel Keyboard; test failed"
50503 "Front panel Keyboard; test aborted"
50504 "Front panel Keyboard; not all keys were
pressed"
50505 "Front panel keyboard I2C connection failed"
50506 "Unable to get slashversion"
50600 ""
50602 "Front panel Remote control; test failed"
50603 "Front panel Remote control; test aborted"
50604 "Front panel remote control; can not access
FP"
50605 "Front panel remote control; no user input re-
ceived"
50700 ""
50701 "Execution of the command on the analogue
board failed."
50702 "The frontpanel could not be accessed by the
ana-logue board."