Service Position - Yamaha DRX-1 Service Manual

DRX-1

SERVICE POSITION

Front
Front
DVIO board
To put the DVIO board in a service position, an
extender board must be used. This extender board can
be ordered with codenumber 3104 128 07770.
DVIO Extender
DVIO 1
10
Photo 1
Photo 2
Photo 3
DVIO 2
Photo 4
Digital board
After demounting of DVIO board, the top side of the
digital board is in reach. To reach the bottom side of the
digital board, the DVDR module must be demounted
together with the digital board. Connected to each
other, the assembly can be set in a service position. In
this position, the bottom side of the digital board and the
servo board are in reach to be serviced.
Digital 1
Photo 5
Digital 2
Photo 6