Startup Of Openport Platform - Panasonic TH-55AF1U Operating Instructions Manual

Startup of OpenPort PLATFORM

This unit is equipped with the OpenPort PLATFORM system based on Android.
Set the input select to OpenPort PLATFORM for using.
Startup
The startup processing of the OpenPort PLATFORM system is performed when the unit starts up while the power
indicator is off (power-off status) or lighting in red (standby status).
The startup screen appears while the unit is starting up in the OpenPort PLATFORM input selection status.
Note
●
Approx. 40 seconds for startup. When starting up for the first time, approx. 70 seconds are taken.
●
When [Options] - [Startup logo] is set to [On], this is displayed followed by the Panasonic logo.
●
When the power indicator is lighting in orange (standby or sleep status), the OpenPort PLATFORM system is
operating. When the unit starts up in this status, the startup screen does not appear.
●
When OpenPort PLATFORM cannot respond for some reason, it is restarted automatically and then the recovery
processing is performed.
Shutdown
The shutdown processing of the OpenPort PLATFORM system is performed either when the power is turned off using
the <Main Power On / Off button> or the power is turned off using the remote control, etc. when [Setup] - [OpenPort
PLATFORM standby] is set to [Off].
During shutdown process, the power indicator lights up in orange from green illumination, the message [Shutting down
OpenPort PLATFORM. Please wait.] appears.
Note
●
Approx. 30 seconds for shutdown.
●
While the OpenPort PLATFORM system is shutting down, the remote control operation or external control
commands are not accepted.
●
When the unit is in standby status (Power Indicator: Red) by shutting down the OpenPort PLATFORM system, the
wired LAN or wireless LAN networks are cut, and the power can be turned on only by the following operations. (The
power cannot be turned on by [Setup] - [Set up timer] as well.)
Power-on by the power button of remote control
•
"PON" command reception from the SERIAL terminal
•
Forcibly shutting down the OpenPort PLATFORM system
[TOOLS] - [Shutdown]
[OpenPort PLATFORM Shutdown]
23
English