Identifying Controls - Panasonic TH-55AF1U Operating Instructions Manual

Identifying Controls

Main unit
● To take out/store the power indicator and remote
control sensor, operate the lever on the rear panel.
It is also possible to press the remote control
sensor directly to store.
Note
●
For normal use, pull out the power indicator and
remote control sensor from the edge side of the
main unit by operating the lever on the rear panel.
Depending on the setup condition such as when
using the multi display, store them in the main unit.
1 Power Indicator / Remote control sensor
The Power Indicator will light.
When the power of the unit is ON (Main Power On
/ Off button: ON)
● Picture is displayed: Green
● Power OFF (standby) with remote control:
When [OpenPort PLATFORM standby] is set to
•
[Off]: Red
When [OpenPort PLATFORM standby] is set to
•
[On]: Orange (Red/Green)
●
Power OFF (sleep) with "Power management"
function: Orange (Red/Green)
When the power of the unit is OFF (Main Power
On / Off button: OFF): No light
18
English
Note
●
Even if the display unit is turned off with the power
indicator off, some of the circuits are in power-on
status.
●
When the power indicator is orange, power
consumption during standby/sleep is generally
larger than that of when the power indicator is red.
●
When the power indicator is changing from green
showing the picture is displayed to red or off, while
the OpenPort PLATFORM system is shutting down,
the indicator temporarily illuminates in orange. In
this status, the remote control operation is ignored.
●
When the <Main Power On / Off button> is pressed
while the power indicator is lighting in orange
(standby or sleep status), the power indicator blinks
once, and then the shutdown processing of the
OpenPort PLATFORM system (see page 23) is
performed.
When the shutdown is complete, the power
indicator goes off.