Installation Diagram Of Indoor And Outdoor Units - Toshiba RAS-10GKHP-ES2 Service Manual

8-2. Installation Diagram of Indoor and Outdoor Units

INSTALLATION DIAGRAM OF INDOOR AND OUTDOOR UNITS
2
Wireless remote control
Before installing the
wireless remote control
·
With the remote control cover
open, load the batteries supplied
correctly observing their
polarity.
2 2 2 2 2 Wireless remote control
Cover
3 Batteries 3 3 3 3
5
Sasa-zeolite
Vitamin C
6
Bio-enzyme &
filter
Gingko filter
8
Pan head
wood screw
Hook
1
Installation
plate
Shield pipe
4
Remote control holder
Vinyl tape
Apply after carrying
out a drainage test.
Saddle
Extension
drain hose
(Not available,
provided by
installer)
– 28 –
FILE NO. SVM-06039
For the rear left and left piping
Wall
Insert the cushion between
the indoor unit and wall, and
tilt the indoor unit for better
operation.
Do not allow the drain hose to
get slack.
Cut the piping
hole sloped
slightly.
Make sure to run the drain
hose sloped downward.
The auxiliary piping can be
connected to the left, rear left,
rear right, bottom right or
bottom left.
Rear
right
Left
Rear
Bottom right
left
Bottom left
Insulate the refrigerant pipes
separately with insulation, not
together.
6 mm thick heat resisting
polyethylene foam