Basic Play; Other Modes Of Play; Repeat Play; Program And Random Play - Panasonic SC-PT480 Operating Instructions Manual

Basic play

Preparation
To display the picture, turn on your TV and change its video input mode
(e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the connection to this unit.
1
Press [Í]1 to turn on the unit.
2
Press [DVD]5 to select "DVD/CD".
3
Press [< OPEN/CLOSE]5 to open the disc tray.
4
Load the disc.
≥ Load double-sided discs so the label for the
side you want to play is facing up.
5
Press [1 PLAY]6 to start play.
≥ Press [r, VOL, s]> to adjust the volume.
[Note]
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.
Press [∫ STOP]6 when you finish to preserve the unit's motor and your
TV screen.
≥ Total title number may not be displayed properly on iR/iRW.
Basic controls
One touch play (remote control only): [1 PLAY]6
(during standby mode)
The main unit automatically turns on and starts playing the disc in the
tray.
Stop: [∫ STOP]6
The position is memorised while "RESUME STOP" is on the screen.
≥ Press [1 PLAY]6 to resume.
≥ Press [∫ STOP]6 again to clear the position.
Pause: [; PAUSE]6
≥ Press [1 PLAY]6 to restart play.
Skip: [SKIP:, SKIP 9]6
Search: [SEARCH6, SEARCH5]6 (during play)
Slow-motion: [SEARCH6, SEARCH5]6 (during pause)
≥ Up to 5 steps.
≥ Press [1 PLAY]6 to start normal play.
≥ [VCD] Slow-motion: Forward direction only.
≥ [MPEG4] [DivX] Slow-motion: Does not work.
Frame-by-frame: [2;, ;1]9 (during pause)
[DVD-VR] [DVD-V] [VCD]
≥ [DVD-VR] [VCD] Forward direction only.
On-screen item select: [3, 4, 2, 1, OK]9
[3, 4, 2, 1]9: Select
[OK]9: Confirm
Enter number: Numbered buttons
[DVD-VR] [DVD-V] [VCD] [CD]
e.g. To select 12: [S10]3 [1]
[VCD] with playback control
Press [∫ STOP]6 to cancel the PBC function, and then press the
numbered buttons.
[DVD-V] Show a disc top menu: [TOP MENU]8
[DVD-V] Show a disc menu: [MENU]7
Return to previous screen: [RETURN]E
[VCD] (with playback control) Show a disc menu: [RETURN]E
Main unit display:
[For[Australia]and]N.Z.] [FL DISPLAY]F
[Except[Australia]and]N.Z.] [–FL DISPLAY]F (press and hold)
[DVD-VR] [DVD-V] [WMA] [MP3] [MPEG4] [DivX]
,-.
Time display Information display (e.g. [DVD-VR] Program number)
[JPEG]
,-.
SLIDE Contents number
Label facing up
[2]

Other modes of play

Repeat play

This works only when the elapsed play time can be displayed. It also
works with all JPEG content.
During play, press and hold [–REPEAT]:, to show the
repeat mode.
While the repeat mode is displayed, press [–REPEAT]: to select the item
to be repeated.
e.g. [DVD-V]
`TITLE ---. `CHAP. ---. `OFF
^----------------------------------------------------b
To cancel, select "OFF".
Items shown differ depending on the type of disc and playback mode.

Program and Random play

[DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG] [MPEG4] [DivX]
Preparation
While stopped, press [PLAY MODE]: to select the play
mode.
Program and random playback screens appear sequentially.
Program ------------------------------------------) Random
^--- Exit program and random screens (}
≥ [DVD-VR] Select "DATA" in "DVD-VR/DATA" (
play MP3, JPEG, MPEG4 or DivX contents.
≥ If "PLAYBACK MENU" screen appears, select "AUDIO/PICTURE" or
"VIDEO" ( 12, Using PLAYBACK MENU), then proceed with the
above.
≥ For a disc with both WMA/MP3 and JPEG contents, select either music
or picture contents.
WMA/MP3: Select "MUSIC PROGRAM" or "MUSIC RANDOM".
JPEG: Select "PICTURE PROGRAM" or "PICTURE RANDOM".
≥ [DVD-V] Some items cannot be played even if you have programmed
them.
Program play (up to 30 items)
1
Press [3, 4]9 to select an item and press [OK]9.
e.g. [DVD-V]
DVD-V PROGRAM
SELECT TITLE
TITLE
TITLE
TITLE
TITLE
≥ Repeat this step to program other items.
≥ To return to the previous menu, press [RETURN]E.
2
Press [1 PLAY]6 to start play.
To select all the items
Press [3, 4]9 to select "ALL" and press [OK]9.
To clear the selected program
1 Press [1]9 and then press [3, 4]9 to select the program.
2 Press [CANCEL]4.
To clear the whole program
Press [1]9 several times to select "CLEAR ALL", and then press [OK]9.
The whole program is also cleared when the disc tray is opened, the unit
is turned off or another source is selected.
Random play
1
(Only when the disc has groups or multiple titles.)
Press [3, 4]9 to select a group or title and press
[OK]9.
e.g. [DVD-V]
DVD-V RANDOM
S E L E C T T I T L E
*
≥ " " represents selected. To deselect, press [OK]9 again.
2
Press [1 PLAY]6 to start play.
19, OTHERS menu) to
TITLE CHAPTER
1
1
2 2
3 3
4
4
5
TITLE 1
TITLE 2
TITLE 3
11