Basic play
Preparation
To display the picture, turn on your TV and change its video input mode.
Using the main unit
1
Turn on the unit.
2
SELECTOR~
Select "DVD/CD".
3
~
OPEN/CLOSE
Open all the disc trays.
• To select a desired tray
(-+
below, Selecting the desired tray).
• Press
[~OPEN/CLOSE)
again to close all the disc trays.
Start play.
• Turn [-,
+
VOLUME] to
adjust the volume.
• You can enjoy surround
sound when you press
[CC
PUI) on the remote
control to turn on Dolby Pro
Logic II
(-+
28).
51
~
Label
= -
'Il
facing up
Load the disc.
• Load double-sided discs so the
label for the side you want to play is
facing up.
• Press [EXCHANGE) to load discs
one by one.
• For DVD-RAM, remove the disc
from its cartridge before use.
• Do not:
- Load more than one disc per tray.
- Push or pull out the tray by hand.
4
Press to select a disc directly.
• You can also select the disc using the remote
control
(-+
17, Selecting a disc).
'::/0-
TUNE
-G6=' /
Press to skip.
Press and hold to
- search during play
- start slow-motion play during pause
• Press
[~)
(Play) to start normal play.
EXCHANGE~
During play,
• All trays are opened (except the tray that the disc
is playing) .
• Press [EXCHANGE] to close the top tray. Press
again until all the trays are closed.
SEt~~T~R
CD ® ® 0 ®
.....
Press
[~OPEN/CLOSE)
again to close the tray.
10
~ mmI
g •
DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED. To preserve the unit's motor and your TV screen, press [_) (Stop) when you are
a::
finished with the menus.
• Total title number may not be displayed properly on
+ R/+
RW.
III