TABLE OF CONTENTS Page Safety instructions Inverter Welders • Installation Operation • How to use the machine (TIG Welding) • How to use the machine (Electrode MMA Welding) • Thermal protection • Maintenance Troubleshooting Guide • Electrode guide (for unskiled welders) Welding machine technical data Wiring diagram Spare parts list...
SAFETY INSTRUCTIONS When using power equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following. If used correctly, welders pose little risk to the operator; however, care should always be taken to ensure safety and proper performance.
Page 5
• DON’T OVERREACH: Keep proper footing and balance at all times. • DRESS PROPERLY: DO NOT wear loose clothing or jewellery. They can be caught in moving parts. Wear protective hair covering to cover long hair, and gloves and non-slip footwear is recommended when working outdoors.
INVERTER WELDERS The product is a portable, lightweight, single-phase 230V, 60/60Hz welder with inverter technology. It allows MMA welding with all electrodes type and the TIG welding of the most metals except the aluminium alloys. Can be connected to power generators with power equal to or higher than that reported in the table in Page 9.
OPERATION HOW TO USE IT Warning: Use all precautions required in the safety general manual before operating the welder, reading carefully the risks linked to the welding process. TIG WELDING • Select the proper electrode polarity (direct or reverse) of the electrode (for more information see the general part of the safety manual and the information on the electrode packaging).
OPERATION (cont.) Warning: Use all precautions required in the safety general manual before operating the welder, reading carefully the risks linked to the welding process. ELECTRODE WELDING (MMA) • Select the proper electrode polarity (direct or reverse) of the electrode (for more information see the general part of the safety manual and the information on the electrode packaging).
TROUBLESHOOTING If you are still having difficulty with your welder, do not hesitate to contact our service team on: 1800 011 812 WELDING INFORMATION Table for selection of the welding current according to the electrode (unskilled welder) Page 8...
1YEAR WARRANTY Subject to the warranty conditions below, this Weldcorp product (“the Product”) is warranted by ITW Group, a division of ITW Australia Pty Ltd (“the Company”) to be free from defects in material or workmanship for a period of 12 months from the date of original purchase (“the Warranty Period”).
Page 13
WARRANTY FORM THIS WARRANTY FORM SHOULD BE REAINED BY THE CUSTOMER AT ALL TIMES For your record and to assist in establishing date of purchase (necessary for in warranty service) please keep your purchase docket and this form completed with the following particulars. PURCHASED FROM SUBURB DATE...
Page 15
Manufactured in Italy Cyclone Tools Pty Ltd ABN 89 169 427 061 73C Elizabeth Street Wetherill Park NSW 2164 www.weldcorp.com.au AUS Helpline: 1800 001 812...
Need help?
Do you have a question about the INVERTER TIG140 and is the answer not in the manual?
Questions and answers