Troubleshooting
Will not work
Motor Overload
Protection
•
Switch not in the ON position
•
Juice press arm not lowered
•
Juicing cone or fruit dome not assembled properly
•
Filter not assembled properly
•
Motor overload protection may have operated (see below)
•
The juicer is fitted with an overload protector to prevent damage to the Motor.
If the Motor suddenly stops working after heavy or long periods of use, turn
OFF at the ON/OFF button, unplug from the wall and allow the unit to cool
for 15 minutes. Once the unit is cooled you will be able to use the juicer again
as normal.
Note: The unit MUST be unplugged from the supply to allow the protector
to reset.
•
Despite this overload protector We suggest juicing in smaller batches in order
to protect the Motor.
9