Page 2
Card remote commander RM-X115 • Optional controller accessory Rotary commander RM-X4S *1 This unit works with Sony products only. *2 A CD TEXT disc is an audio CD that includes information such as the disc name, artist name, and track names. This information is recorded on...
ACC (accessory) position on the ignition switch After turning off the ignition, be sure to press and hold (OFF) on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. OPEN SHUF BL SKIP XR-F5100EE...
SEEK SEEK (DISC/PRESET) (+): to select upwards (SEEK) (–): to select leftwards/ (DISC/PRESET) (–): to select downwards q DISC (ALBUM)/PRESET buttons (+/–) To receive preset stations/change the disc* skip albums* *1 When an optional CD/MD unit is connected. *2 Available only when an optional CD unit with the MP3 file control function is connected, and MP3 file is played.
If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. To maintain high sound quality Be careful not to splash juice or other soft drinks onto the unit or tapes.
Getting Started Resetting the unit Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Remove the front panel and press the RESET button with a pointed object, such as a ballpoint pen.
Attaching the front panel Place hole A of the front panel onto the spindle B on the unit, then lightly push the left side in. Press (SOURCE) on the unit (or insert a cassette) to operate the unit. Note Do not put anything on the inner surface of the front panel.
Cassette Player Listening to a tape Press (OPEN) and insert a cassette. Playback starts automatically. Close the front panel. If a cassette is already inserted, press (SOURCE) repeatedly until “FWD” or “REV” appears to start playback. FWD: The side facing up is played.
Radio The unit can store up to 6 stations per band (FM1, FM2, FM3*, AM1 and AM2). Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents. * FM3 tuning range is 65 to 74 MHz (at 30kHz step). Storing stations automatically —...
If FM stereo reception is poor — Monaural Mode During radio reception, press (SENS) repeatedly until “MONO-ON” appears. The sound improves, but becomes monaural (“ST” disappears). To return to normal radio reception mode, press (SENS) (“MONO-OFF” appears). If FM broadcasts are difficult to hear, set DSO to “OFF”...
Erasing the station name Press (SOURCE) repeatedly to select the radio. Press (MODE) repeatedly to select the band. Press (LIST) for 2 seconds. Press (DSPL) for 2 seconds. The stored names will appear. Press the volume control dial to select the station name you want to erase.
Other Functions You can also control the unit (and optional CD/ MD units) with a rotary commander (optional). Using the rotary commander First, attach the appropriate label depending on how you want to mount the rotary commander. The rotary commander works by pressing buttons and/or rotating controls.
Changing the operative direction The operative direction of controls is factory-set as shown below. To increase To decrease If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. Press (SEL) for 2 seconds while pushing the VOL control.
Changing the sound and display settings The following items can be set: • REAR/SUB* — to switch the audio output REAR or SUB. – Select “REAR” to output to a power amplifier. – Select “SUB” to output to a subwoofer. •...
Setting the equalizer (EQ3) You can select an equalizer curve for 7 music types (XPLOD, VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM and OFF (equalizer OFF)). You can store a different equalizer setting for each source. Selecting the equalizer curve Press (SOURCE) to select a source (Radio, Tape, CD or MD).
Setting the Dynamic Soundstage Organizer (DSO) If your speakers are installed into the lower part of the doors, the sound will come from below and may not be clear. The DSO (Dynamic Soundstage Organizer) function creates a more ambient sound as if there were speakers above the dashboard (virtual speakers).
Cautions when connecting MGS-X1 and MD unit(s) This unit recognizes MGS-X1 as an MD unit. • When you want to play MGS-X1, press (SOURCE) to select “MS” or “MD.” When “MS” appears in the source display, MGS-X1 starts to play. When “MD” appears in the source display, press (MODE) to select “MS,”...
Playing tracks repeatedly — Repeat Play You can select: • REP-TRACK — to repeat the current track. • REP-ALBM* — to repeat the tracks in the current album. • REP-DISC* — to repeat the tracks in the current disc. *1 Available only when an optional CD unit with the MP3 file control function is connected, and MP3 file is played.
Labelling a CD — Disc Memo (When connecting a CD unit with the CUSTOM FILE function) You can label each disc with a custom name (Disc Memo). You can enter up to 8 characters for a disc. If you label a CD, you can locate the disc by name (page 21).
If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit.
Notes • For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch. • Never touch the connectors directly with your fingers or with any metal device. Replacing the lithium battery Under normal conditions, battery will last approximately 1 year.
Supplied accessories Optional accessories Optional equipment Note This unit cannot be connected to a digital preamplifier or an equalizer which is Sony BUS system compatible. Design and specifications are subject to change without notice. Speaker outputs (sure seal connectors) 4 – 8 ohms 52 W ×...
• You tried to play back MP3 files with an optional CD unit which is incompatible with MP3. t Play back with a Sony MP3 compatible CD unit, such as the CDX-757MX. The contents of the memory have been erased.
OFFSET There may be an internal malfunction. t Check the connection. If the error indication remains on in the display, consult your nearest Sony dealer. RESET The CD/MD unit cannot be operated because of some problem. t Press the RESET button on the unit.
Page 26
The local seek mode is on during automatic tuning (page 10). “ ” or “ ” You have reached the beginning or the end of the disc and you cannot go any further. If these solutions do not help improve the situation, consult your nearest Sony dealer.
Page 30
9, 10 8, 9, 10 9, 13, 17, 21, 23, 24 10, 11, 12 SHUF SENS 8, 10, 20 После выключения зажигания обязательно нажмите кнопку (OFF) на аппарате и удерживайте ее нажатой, пока не погаснет дисплей. OPEN BL SKIP XR-F5100EE...
Page 31
SEEK SEEK (DISC/PRESET) (+): для перехода вверх по меню (SEEK) (–): для перехода влево по меню/ (DISC/PRESET) (–): для перехода вниз по меню Пульт дистанционного управления RM-X115 SENS (SEEK) (+): для перехода вправо по меню/ > Примечание (OFF) (SOURCE) Совет DSPL MODE PRESET...
Page 60
• Lead-free solder is used for soldering certain parts. • Halogenated flame retardants are not used in the certain printed wiring boards. • Halogenated flame retardants are not used in cabinets. • Paper is used for the packaging cushions. Sony Corporation Printed in Thailand...
Need help?
Do you have a question about the XR-F5100EE and is the answer not in the manual?
Questions and answers