Environmental Protection Notes - GRAUPNER ULTRA DUO PLUS 80 Operating Manual

Environmental Protection Notes

When this product comes to the end of its useful life, you must not dispose of it in the ordinary domestic waste. The correct method of disposal
is to take it to your local collection point for recycling electrical and electronic equipment. The symbol shown here, which may be found on
the product itself, in the operating instructions or on the packaging, indicates that this is the case.
Individual markings indicate which materials can be recycled and re-used. You can make an important contribution to the protection of our
common environment by re-using the product, recycling the basic materials or recycling redundant equipment in other ways.
Remove batteries from your device and dispose of them at your local collection point for batteries. In case of R/C models, you have to remove electronic
parts like servos, receiver, or speed controller from the product in question, and these parts must be disposed of with a corresponding collection point
for electrical scrap.
If you don't know the location of your nearest disposal centre, please enquire at your local council office
EU CONFORMITY DECLARATION
We hereby declare that the following product: ULTRA DUO PLUS 80, Order No. 6480
conforms with the essential protective requirements as laid down in the directive for harmonising the statutory directives of the member states concerning
electro-magnetic interference (2004/108/EG) and LVD (2006/95/EG).
This product has been tested for electro-magnetic interference in accordance with the following norms:
EMV: EN 61000-3-2 / EN 61000-3-3
EN 55014-1 / EN 55014-2
LVD: EN 60950-1
This declaration was produced by:
Graupner/SJ GmbH
Henriettenstr. 96
73230 Kirchheim/Teck
and is valid for the manufacturer / importer of the product
73230 Kirchheim/Teck, Germany, on 10.04.2013
56
.
Ralf Helbing
Managing Director
Operating Manual ULTRA DUO PLUS 80