Rear Brake Assembly - Giant TRINITY ADVANCED PRO Instruction Manual

Rear Brake Assembly

M6
Assemble rear brake to the frame by M6
screw, locking torque 6Nm.
To ensure even brake pad position and action, spring tension can be adjusted using the
highlighted M4 screws.
M5
M3
Cut off excess brake cable, assemble
brake cover with M5 screws and M3
Hexagon socket countersunk head screws.
To avoid affecting braking function, the end
of brake cable should not touch the brake
cover.
M3
17
M5
Assemble the rear brake cable by routing
through frame, pipe and brake. Adjust to
reasonable gap between brake pad and rim.
End of the brake cable forward with a cover
plate with M5 screws, locking torque 6Nm.
The end of brake cable cannot touch brake
cover to avoid affect the brake function.
Rotate the cable tension adjustment screw
to fine-tune the brake pad and rim gap.
Version 9 /2015