Brake Assembly; Front Brake Assembly - Giant TRINITY ADVANCED PRO Instruction Manual

Table of Contents

Advertisement

Brake Assembly

Front Brake Assembly

M6
Assemble front brake at fork with M6
screws, locking torque 6Nm.
Assemble crown cover on the bottom of
the fork, to avoid the brake cable contact
with the tire
Cut off the extra brake cable and insert
to the closing line holes
Assemble front brake cable by passing
through fork, pipe and brake. Adjust to the
reasonable gap between brake pad and rim
with M5 screws, locking torque 6Nm
To ensure even brake pad position and
action, spring tension can be adjusted using
the highlighted M4 screws.
Rotate the cable tension adjustment screw
to fine-tune the brake pad and rim gap.
16
Version 9 /2015

Advertisement

Table of Contents
loading

Table of Contents