What You Need Before You Begin - US Robotics sureconnect Quick Installation Manual

For current product support and contact information, go to the following Web
site:
http://www.usr.com/broadbandsupport
Thank you for purchasing the U.S. Robotics
Gateway. The following instructions will walk you through installation of the
gateway.
Installation Overview and System Requirements
NOTE: It is important that you have your serial number written down for
future reference. If you ever need to call our technical support
department, you will need this number to receive assistance. You can
find your 12-character serial number on a bar code sticker located on
the bottom of the gateway and also on the box. You will also need your
model number. It is noted below.
Write your serial number in the space provided below.
Serial Number

What You Need Before You Begin

• Active ADSL and Internet service from your local telephone company
or Internet Service Provider (ISP).
• Your user name and password, if they were assigned.
• Some installations may require a special splitter between the gateway
and telephone wall jack. The splitter must include both a phone jack
and a router jack. If it does not, do not install it between the wall jack
and the gateway.
Your ISP should be able to provide the following, if needed:
• VPI/VCI values
• ADSL Standard (Modulation)
• Encapsulation Mode
• Authentication (PAP or CHAP) for PPP connections
SureConnect ADSL Wireless
9106
Model Number
3