Sony xav-7w Operating Instructions Manual page 23

For stations without alternative
frequencies
Press SEEK/AMS –/+ while the station name is
flashing (within 8 seconds).
The unit starts searching for another
frequency with the same PI (Programme
Identification) data ("PI Seek" appears).
If the unit cannot find the same PI, the unit
returns to the previously selected frequency.
Staying with one regional
programme
When AF function is on: this unit's factory-set
setting restricts reception to a specific region,
so you won't be switched to another regional
station with a stronger frequency.
If you leave this regional programme's
reception area or would like to take
advantage of the whole AF function, set
"Regional" to "off."
R e g i o n a l
o f f
Note
This function does not work in the United Kingdom and
in some other areas.
Local Link function
(United Kingdom only)
This function enables you to select other local
stations in the area, even if they are not stored
on your number buttons.
1
Press a number button (1 to 6) that
has a local station stored on it.
2
Within 5 seconds, press the
number button of the local station
again.
3
Repeat this procedure until the
desired local station is received.
Receiving traffic
announcements — TA/TP
By activating the Traffic Announcement (TA)
and Traffic Programme (TP), you can
automatically tune in an FM station
broadcasting traffic announcements. These
settings function regardless of the current FM
programme/source (e.g., CD/MD/MS/
VIDEO). The unit switches back to the
original source when the bulletin is over.
Press TA on the unit repeatedly until "TA on"
appears.
The unit starts searching for traffic
information stations.
"TP" indicates reception of such stations, and
"TA" flashes during an actual traffic
announcement. The unit will continue
searching for stations available with TP if
"NO TP" is indicated.
To cancel all traffic announcements, select
"TA off.
To
Cancel current announcement TA on the unit
Tip
You can also cancel the current announcement by
pressing SOURCE or MODE.
Presetting the volume of traffic
announcements
You can preset the volume level of the traffic
announcements so you won't miss hearing
them.
1
Press VOL –/+ to adjust the desired
volume level.
2
Press TA on the unit for 2 seconds.
"TA" or "TA VOL" appears and the setting is
stored.
Press
23