Sony MHC-DX80 Operating Instructions Manual page 7

Note
Keep the speaker cords away from the antennas to
prevent noise.
5 Connect the FM/AM antennas.
Set up the AM loop antenna, then connect
it.
Jack type A
Extend the FM lead
antenna horizontally.
AM loop antenna
Jack type A
Extend the FM lead
antenna horizontally.
AM loop antenna
6 For models with a voltage selector, set
VOLTAGE SELECTOR to the position of
your local power line voltage.
Set the same voltage range for the sound
broad amplifier and main unit.
220V 230-
120V
240V
Main Unit
03GET_MHC-DX80.p65 GB
7 Connect the power cord to a wall outlet.
To connect optional components
See page 23.
To attach the front speaker pads
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the speakers
and prevent them from slipping.
Positioning the speakers
Place the front speakers at an angle of 45
degrees from your listening position.
Front
speaker
(L)
Surround
speaker
(L)
230 - 240V
When carrying this system
120V 220V
Do the following to protect the CD mechanism.
1
Sound Broad
Amplifier
2
3
4
7
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with the
adaptor).
Sound Broad
Main Unit Amplifier
45º
Make sure that all discs are removed from
the unit.
Hold down CD and then press ?/1 until
"LOCK" appears.
Release ?/1 first, then release CD.
Unplug the AC power cord.
17/07/2001, 2:47 PM
MHC-DX80 4-232-652-14 (1)
Front
speaker
(R)
Surround
speaker
(R)
7