Programming The Cd Tracks; Program Play - Sony MHC-DX80 Operating Instructions Manual

Mini hi-fi component system
Table of Contents

Advertisement

Playing the CD (continued)
To
Play repeatedly
(Repeat Play)
Cancel Repeat
play
Exchange other CDs
while playing
Remove the CD
*1
All the tracks repeated up to five times.
You cannot use this function during SHUFFLE
ALL DISCS.
*2
To repeat the current track you are playing.
Tip
Pressing the CD while the power is off automatically
turns the power on and CD is selected as a function.
When the system is in the power saving mode, this
function does not work.
Programming the CD
tracks
–– Program Play
You can make a program of up to 25 tracks
from all the CDs in the order you want them to
be played.
1
Press CD, then place a CD.
2
Press PLAY MODE repeatedly until
"PROGRAM" appears in the display.
3
Press one of the DISC 1~3 to select a
CD.
To program all the tracks on a CD at once,
proceed to step 5 while "AL" appears on the
display.
10
04CDP_MHC-DX80.p65 GB
Do this
Press REPEAT repeatedly to
*1
select "REPEAT"
or
"REPEAT 1"
*2
.
Press REPEAT until
"REPEAT" or "REPEAT 1"
disappears from the display.
Press DISC SKIP
EX-CHANGE.
Press Z OPEN/CLOSE.
10
4
Press . or > repeatedly until the
track you want appears in the display.
Disc tray
Track
number
number
5
Press ENTER.
The track(s) is (are) programmed. The
program step number appears, followed by
the total playing time.
6
To program additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7
Press nN.
To
Press
Cancel Program Play
PLAY MODE repeatedly
until "PROGRAM" or
"SHUFFLE" disappears
from the display.
Clear a track from
CLEAR on the remote in
the end
stop mode.
Add a track to the
1 Select the disc tray with
program in stop mode
DISC 1~3 button.
2 Select the track by
pressing . or >.
3 Press ENTER.
Tips
• The program you made remains in the CD player
even after it has been played back. Press nN to
play the same program again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
17/07/2001, 2:48 PM
MHC-DX80 4-232-652-14 (1)
Total playing time
(including selected
track)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents