Tuner; Presetting Radio Stations - Sony MHC-DX80 Operating Instructions Manual

Tuner

Presetting radio stations

You can preset 20 stations for FM and 10
stations for AM.
1
Press TUNER/BAND repeatedly to
select FM or AM.
2
Press and hold M or m (or TUNING
+/– on the remote) until the frequency
indication starts to change, then
release.
Scanning stops when the system tunes in a
station. "TUNED" and "STEREO" (for a
stereo program) appear.
3
Press TUNER MEMORY.
A preset number appears in the display.
4
Press . or > to select the preset
number you want to store.
5
Press ENTER.
"COMPLETE" appears in the display.
The station is stored.
6
Repeat steps 1 to 5 to store other
stations.
12
05TUN_MHC-DX80.p65 GB
To tune in a station with a weak
signal
Press M or m (TUNING +/– on the remote)
repeatedly to tune in the station manually.
To change the AM tuning interval
The AM tuning interval is factory set to 9 kHz
(10 kHz in some areas). To change the AM tuning
interval, select any AM station first, then turn off the
power. While holding down the ENTER button, turn
the power back on. When you change the interval,
AM preset stations will be erased. To reset the
interval, repeat the same procedure.
Tips
• The preset stations are retained for half a day even
if you unplug the power cord or if a power failure
occurs.
• Pressing TUNER/BAND while the power is off
automatically turns the power on and TUNER is
selected as a function. When the system is in the
power saving mode, this function does not work.
Preset number
12 17/07/2001, 2:49 PM
MHC-DX80 4-232-652-14 (1)