TP-Link tl-wr845n User Manual page 71

Enable Internet Access Control - Select the check box to enable the Internet Access

Control function, so the Default Filter Policy can take effect.
Rule Name - Here displays the name of the rule and this name is unique.

Host - Here displays the host selected in the corresponding rule.

Target - Here displays the target selected in the corresponding rule.

Schedule - Here displays the schedule selected in the corresponding rule.

Status - This field displays the status of the rule. Enabled means the rule will take effect,

Disabled means the rule will not take effect.
Modify - Here you can edit or delete an existing rule.

To add a new rule, please follow the steps below.
1. Click the Add New... button and the next screen will pop-up as shown in the page of Access
Control Rule Management.
2. Give a name (e.g. Rule_1) for the rule in the Rule Name field.
3. Select a host from the Host drop-down list or choose "Click Here To Add New Host List".
4. Select a target from the Target drop-sown list or choose "Click Here To Add New Target
List".
5. Select a schedule from the Schedule drop-down list or choose "Click Here To Add New
Schedule".
6. In the Action field, select Deny or Allow.
TL-WR845N 300Mbps Wireless N Router
-61-