Wireless Security - TP-Link tl-wr845n User Manual

4.6.2

Wireless Security

Choose menu "Wireless > Wireless Security", you can configure the security settings of your
wireless network.
There are five wireless security modes supported by the router: WEP (Wired Equivalent Privacy),
WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi Protected Access 2), WPA2-PSK (Pre-Shared Key),
WPA-PSK (Pre-Shared Key).
Disable Security - If you do not want to use wireless security, select this check box, but it's

strongly recommended to choose one of the following modes to enable security.
WPA/WPA2 - Personal (Recommended) - It's the WPA/WPA2 authentication type based

on pre-shared passphrase.
Version - you can choose the version of the WPA-PSK security on the drop-down list. The
•
default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
•
either Automatic, or TKIP or AES as Encryption.
TL-WR845N 300Mbps Wireless N Router
-36-