TP-Link tl-wr845n User Manual page 25

5） If the connection type is PPTP/Russian PPTP, the next screen will appear as shown in
the figure below. Configure the following parameters and then click Next to continue.
User Name and Password - Enter the User Name and Password provided by your ISP.

These fields are case sensitive. If you have difficulty with this process, please contact
your ISP.
Confirm Password - Re-enter the password provided by your ISP to ensure the

Password you entered is correct.
Select Dynamic IP if none of the above parameters are provided. Then you just need to enter
server IP address or domain name provided by your ISP.
Select Static IP if IP Address/ Subnet Mask/ Gateway and DNS server address have been
provided by your ISP. Then please enter server IP address or domain name provided by your
ISP, and also enter the corresponding parameters.
5. Click Next to continue, the Wireless settings page will appear as shown in the figure below.
TL-WR845N 300Mbps Wireless N Router
-15-