Before You Begin - Pro-Form 570 User Manual

BEFORE YOU BEGIN

Thank you for selecting the new PROFORM
treadmill. The PROFORM ¨ 570 treadmill combines ad-
vanced technology with innovative design to let you
enjoy an excellent form of cardiovascular exercise in
the convenience and privacy of your home. And when
youÕre not exercising, the unique PROFORM
be folded up, requiring less than half the floor space of
other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
Pulse Sensor
Storage Latch
Handrail
LEFT SIDE
Walking Belt
Foot Rail
Rear Roller
Adjustment Bolts
BACK
4
¨ 570 please call our Customer Service Department at 0345-
089009. To help us assist you, please note the product
model number and serial number before calling. The
model number of the treadmill is PETL57000. The ser-
ial number can be found on a decal attached to the
¨ 570 can treadmill (see the front cover of this manual for the lo-
cation).
Before reading further, please review the drawing
below and familiarise yourself with the parts that are
labelled.
Console
Water Bottle Holder
(Bottle not included)
Key/Clip
Cushioned Walking Platform
for maximum exercise comfort
Incline Leg
5. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON
a. If an extension cord is needed, use only a 3-conductor, 14-gauge (1mm
meters (5 feet).
b. If the walking belt is overtightened, treadmill performance may
decrease and the walking belt may be permanently damaged.
Remove the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn both rear roller adjustment bolts counterclock-
wise, 1/4 of a turn. When the walking belt is properly tightened,
you should be able to lift each side of the walking belt 5 to 7 cm
off the walking platform. The centre of the walking belt should
just touch the walking platform. Be careful to keep the walking
belt centred. Plug in the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is prop-
erly tightened.
c. If the walking belt still slows when walked on, please call our Customer Service Department.
6. SYMPTOM: THE WALKING BELT IS OFF-CENTRE
a. If the walking belt has shifted to the left, first remove the key
and UNPLUG THE POWER CORD. Using the allen wrench,
turn the left rear roller adjustment bolt clockwise, and the right
bolt counterclockwise, 1/4 of a turn each. Be careful not to over-
tighten the walking belt. Plug in the power cord, insert the key
and run the treadmill for a few minutes. Repeat until the walking
belt is centred.
Upright
b. If the walking belt has shifted to the right, first remove the
key and UNPLUG THE POWER CORD. Using the allen wrench,
turn the left rear roller adjustment bolt counterclockwise, and the
right bolt clockwise, 1/4 of a turn each. Be careful not to over-
RIGHT SIDE
tighten the walking belt. Plug in the power cord, insert the key
and run the treadmill for a few minutes. Repeat until the walking
belt is centred.
c. If the walking belt slips when walked on, first remove the key
and UNPLUG THE POWER CORD. Using the allen wrench,
Circuit
turn both rear roller adjustment bolts clockwise, 1/4 of a turn.
Breaker
When the walking belt is correctly tightened, you should be able
to lift each side of the walking belt 5 to 7 cm off the walking plat-
form. Be careful to keep the walking belt centred. Plug in the
power cord, insert the key and run the treadmill for a few min-
utes. Repeat until the walking belt is properly tightened.
2 ) cord that is no longer than 1.5
b
5 Ð7 cm
Rear Roller Adjustment Bolts
a
b
c
13