Vivotek IP7151 Quick Installation Manual page 11

Configure the Wireless Connection
7
. Check the SSID currently set on your wireless access point (AP).
2. Go to IP7152's Configuration > Wireless LAN.
. Type in the SSID consistent
with the setting on your AP.
. Select the Wireless mode as
"Infrastructure".
5. Click Save.
Note:
1.SSID, abbreviated from Service Set Identifier, is the name assigned to the wireless
network. The IP75's factory SSID setting is set to "default".
.Select "Ad-Hoc" wireless mode if you want the IP75 to communicate without
using an AP or wireless router.
For further setup, please refer to user's manual on the software CD.
(IP7152 only)
EN - 0